Customized carbide tungsten steel plate tungsten steel plate tungsten steel plate
[Application range of wear-resistant carbide tungsten steel plates]:
1. Suitable for making cast iron rolls and high-nickel-chromium roll dressing and shaping knives;
2. Suitable for making unloading plates, stamping dies, punches, electronic progressive dies and other stamping dies, etc.
[Special Note]: Accept non-standard customization and special
[Product details of wear-resistant carbide tungsten steel plates]:
1. The purity of raw materials reaches more than 99.95%, the impurity content is low, and the physical properties of the board are more stable;
2. Using spray drying technology, the material is protected by high-purity nitrogen under fully sealed conditions, which effectively reduces the possibility of oxygenation during the preparation process of the mixture. The purity is better and the material is not easy to become dirty;
3. The density of the board is uniform: it is pressed with a 300Mpa isostatic press, which effectively eliminates the occurrence of pressing defects and makes the density of the board blank more uniform;
4. The density of the board is excellent, and the strength and hardness indicators meet the standards: low-pressure sintering technology is used to effectively eliminate the pores inside the board and make the quality more stable.
5. Using cryogenic treatment technology, the internal metallographic structure of the plate can be improved, and the internal stress can be greatly reduced, effectively avoiding the possibility of cracks during the cutting and forming process of the plate;
Carbide plates for Mould |
|
| Type |
Density |
Hardness |
TRS |
Application |
| g/cm |
HRA |
(Bstyle)N/mm |
| YG11 |
14.45 |
88 |
2400 |
Suitable for making precision punching punches, concave dies, and suitable copper and aluminum plates. |
| YG15 |
14.05 |
87.1 |
2700 |
It is suitable for making various types of motor and electronic progressive die concave and convex molds, and has good versatility. |
| YG20 |
13.55 |
85 |
2800 |
It is suitable for making the concave and convex molds of motor progressive dies with large impact loads. |
| MZ20 |
14.45 |
91.5 |
2800 |
It can perfectly solve the problem of material surface corrosion during processing, and its electrical machining performance is better than that of fine-grained and sub-micron-grained alloys with the same hardness index. Suitable for the production of medium and high-speed electronic progressive molds. Suitable for stamping thin sheets of copper and aluminum materials. |
| MZ30 |
14.15 |
89.7 |
3200 |
It can perfectly solve the problem of material surface corrosion during processing and has good resistance to processing corrosion. It is suitable for the production of motor and electronic progressive dies made of stamping copper, aluminum, pure iron, and silicon steel sheets. Its performance is better than that of medium and fine grain grades, and it has good versatility. |
| MZ40 |
13.9 |
88.5 |
3200 |
It can perfectly solve the problem of material surface corrosion during processing and has good resistance to processing corrosion. It is suitable for the production of motor progressive dies made of cold-rolled plates and silicon steel sheets, and has good versatility. |
| MZ50 |
13.4 |
86.2 |
3000 |
It can perfectly solve the problem of material surface corrosion during processing and has good resistance to processing corrosion. It is suitable for the production of motor progressive dies made of cold-rolled plates and silicon steel sheets, and has good versatility. |
| Carbide plates for Mould |
|
| Precise mould parts |
Mould for leading wire frame |
Mould for connector |
Mould for ironcore inmotor |
| punch |
MZ20,YFD35 |
MZ30,YL10.2 |
MZ30,MZ40 |
| Unloading plate |
YG11,YG15,MZ40 |
YG15,MZ40 |
MZ50 |
| concave mold |
MZ30,YL10.2 |
MZ30,YG11 |
YG15,YG20,MZ40 |
| Carbide plates for Shaping Cutter |
| Grade (g/cm) |
Density |
Hardness(HRA) |
Hardness TAS(B type)N/mm |
Application |
| YG6A |
14.89 |
91.5 |
2350 |
YG6X grades and YG6A grades are mainly suitable for dressing cast iron rolls |
| YG6X |
14.93 |
91 |
2480 |
| Ordinary Plates |
| Grade |
Density |
hardness
(HRA) |
Hardness(Btype)N/mm |
Application |
| YG6 |
14.95 |
89.5 |
2580 |
YG8 grades and YG6 grades are widely used in the production of plastic cutting tools. |
| YG8 |
14.74 |
89 |
2710 |
Company Profile
Zhuzhou Xingzhou Carbide Co., Ltd can supply various types of cemented carbide cutting tools and spare parts for electric tools, such as tungsten carbide composite rods, tungsten carbide plate and strip, carbide wear parts, carbide rollers, CNC cutters, endmills, circular saw blades, saw tips, custom tungsten carbide products and DTH drill bits and hammer etc.used for mining, road and bridge construction, oil etc.
Our company has in the word advanced production equipment such as pressure sintering furnace, isostatic cool pressing, actomatic pressing machines, subsequent inner stress relieving processing system , complete quality control and check -out equipment and so on.Our products are widely sold all over the world for their high quality and competitive prices. Most ofour products had been exported to America, Europe, Middle East and Southeast Asia markets.We believe that the cooperation with Zhuzhou Xingzhou Carbide Co., Ltd. should be you best choice.
FAQ
1.Are you a manufacturer or a trade company?
We are a manufacturer of tungsten carbide products in China over 20 years.
2.Where is your company?
We are located in Chinese largest production base of tungsten carbide, Zhuzhou city, Hunan province. Half an hour by car from Changsha airport, two and a half hours by CHR express from Guangzhou station to Zhuzhou city.
3.Why choose XZcarbide?
1)We have more than 20 years of researching, developing, manufacturing and exporting high quality rock drilling tools and tungsten carbide products to the global market.
2)High quality.
3)Competitive price.
4)Excellent customer service.
4.Which port do you shipping from?
We usually ship container from changsha port .
5.What is your minimum order quantity?
Our MOQ are 1pc or 1 set, the price may rely on the order quantity.
6.What is your payment term?
We accept T/T.
7. How about the delivery time?
For general products, we have in stocks.
For others, it depends on the quantity, generally it takes about 15-25workdays.
8. Can I visit your factory?
Warmly welcome to our factory.
Audited Supplier 
){kind=link}
){kind=link}