| Customization: | Available |
|---|---|
| Application: | Industrial, High Precision Tools |
| Standard: | ISO9001:2015 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
We manufactured tungsten carbide rods extruded or pressed.
Diameter from 0.3mm to 35mm, length in 310mm, 330mm or 340mm, or others
Grade in YL10.2,YG10X, YG6, YG8 etc.
Our standard size models
|
Size range(DiaXL mm)
|
Tolerance
|
||
|
D(blank, mm)
|
D (ground, mm)
|
L(mm)
|
|
| Dia(0.3-0.9)x330 | +0/+0.3 | h6/h7 | 0/+2 |
|
Dia(1-5)x330
|
+0.3/+0.4
|
h6/h7
|
0/+2
|
|
Dia(6-20)x330
|
+0.3/+0.6
|
h6/h7
|
0/+2
|
|
Dia(21-35)x330
|
+0.5/1.0
|
h6/h7
|
0/+3
|
| For any other sizes, we are able to custom-made according to clients' requirements or drawings. | |||
Specification
| Material: | Tungsten carbide |
| Dimension: | Dia12*75/100/150mm Dia2.0*330mm various size for choose |
| Ground Tolerance: | H6 based on requirement |
| Blank tolerancce: | +0.3~0.5mm |
| Grade: | K20 K30 K10, YL10.2, YG20 YG10X |
| Production Process: | Power mixing-Pressing-HIP sintering-Blank- Processing- Finished |
| Type: | Round rod |
| Surface: | Blank or grinding |
| Performance | High hardness, wear /corrosion resistancce, good toughness, good straightness |
| Non-standard or tolerance | Can be customized |
Carbide Rod Grade Information
Grades for Cutting Tools
| Grade |
ISO Grade |
WC% | Co% |
Grain Size μm |
Hardness (HRA) |
Density g/cm3 |
T.R.S. N/mm2 |
Application |
| YG6X | K10 | 94 | 6 | 0.6-0.8 | 14.9 | 92 | 2000 | Suitable for processing Chilled cast iron, heat-resistant alloy steel, and fine process of common cast iron |
| YL10.2 | K25-K35 | 90 | 10 | 0.6-0.8 | 14.5 | 92.5 | 3800 | Wear resistance and strength comparatively higher,suitable for PCB micro drills,for making drills,end mill,reamer,taps,burrs etc. |
| Grade |
ISO Grade |
WC% | Co% |
Grain Size μm |
Hardness (HRA) |
Density g/cm3 |
T.R.S. N/mm2 |
Application |
| YG8 | K30 | 92 | 8 | 1.2 | 14.6 | 89 | 2320 | Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| YG6 | K20 | 94 | 6 | 1.2 | 14.9 | 89.5 | 2150 | Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron. |
| YG15 | 85 | 15 | 1.6 | 14.1 | 86.5 | 2400 | Medium grain, for mining tools, cold heading and punching dies | |
| YG20 | 80 | 20 | 1.6 | 13.7 | 85 | 2500 |
suitable for stamping dies such as screw, watch parts
|
|
| YG20C | 80 | 20 | 1.8-2 | 13.6 | 82 | 2200 | suitable for colding heading dies, stamping dies such as shaft ,standard parts |
Application Of Tungsten Carbide Rod
Our tungsten carbide rod manufactured with high hardness and toughness, vibration-resistance, especially no stick when working. It is widely used for making
- various kinds of carbide solid tools and cutting tools, such as drills, end mills, thread taps, rotating file,etc.
- A good material for general-purpose. Suitable for machining carbon steel, cast irons, stainless steel, heat-resistance steel, nickel based alloys and titanium alloys.
- Tungsten Carbide wear Parts
- Tungsten Carbide Mouldingdies
Production Features
- All carbide rods are made from the best tungsten carbide powders. The carbide rods are with submicron and average grain size ,the powder is even and stick together firmly,the purity of tungsten carbide powders is quite high.
- All carbide rods are made by the extrusion machine which insure that the inside structure of carbide rods is excellent and apprerance of carbide rods if better ,the flatness is improved a lot .
- All carbide rods are through HIP sintering which insure that the inside structure of carbide rods is free pore and can stick together firmly .Also the TRS is improved around 30% after HIP sintering.
- large stock of regular sizes of carbide rods ,which can enable us to make the delivery within 24 hours.
- Replacement .we will replace the carbide rods for you if there is any defects.
We Guarantee:
* We are real factory in Zhuzhou
* Manufactured with100% tungsten carbide raw material
* Comply with ISO 9001:2015 Certification
* Rich experience of over 20 years
* Advanced technology , automatic pressing , HIP sintering
* Full ability to accept OEM & ODM orders
* Strict inspection for quality of raw material and finished products
Our Tungsten Carbide Rod Types
Package and Shipment information (support customization)
Who We Are
Zhuzhou Xingzhou Carbide Co., Ltd. is a high-tech joint-stock enterprise specializing in the research and development, production and sales of cemented carbide products. We have more than 20 years of experience in manufacturing industrial tools, located in Zhuzhou High-tech Industrial Development Zone.
Why Choose Us
We can supply various types of cemented carbide cutting tools and spare parts for electric tools, such as tungsten carbide composite rods, tungsten carbide plate and strip, carbide wear parts, carbide rollers, CNC cutters, endmills, circular saw blades, saw tips, custom tungsten carbide products and DTH drill bits and hammer etc.used for mining, road and bridge construction, oil etc.Our company has in the word advanced production equipment such as pressure sintering furnace, isostatic cool pressing, actomatic pressing machines, subsequent inner stress relieving processing system , complete quality control and check -out equipment and so on.Our products are widely sold all over the world for their high quality and competitive prices. Most of our products had been exported to America, Europe, Middle East and Southeast Asia markets.We believe that the cooperation with Zhuzhou Xingzhou Carbide Co., Ltd. should be your best choice.
Our FactoryFor more detail size,pls don't hesitate to contact us,thanks
){kind=link}