| ISO Code |
Grade |
Physical and mechanical properties |
Applications recommended |
| Density g/cm³ |
Hardness HRA |
TRS Mpa |
| P10 |
YT05 |
12.6 |
92.5 |
1260 |
It is suitable for finishing of steel and casting steel machining, high cutting speed, small feed rate and low depth is recommended. |
| YT15 |
11.3 |
91 |
1300 |
It is suitable for semi-finishing of steel and casting steel maching, high cutting speed, medium feed rate is recommended. |
| K20 |
YD201 |
14.89 |
91 |
1800 |
It is suitable for roughing to finishing machining of hest-resistance alloy, Ti alloy, casting iron and aluminum alloy. |
| YG6 |
14.9 |
89.5 |
1670 |
It is suitable for light roughing and semi-finishing of casting iron,nonferrous metal, heat-resistance alloy and Ti alloy. |
| YG8 |
14.6 |
89 |
1840 |
It is suitable for semi-finishing and roughing of casting iron, nonferrous metal, heat-resistance alloy and Ti alloy at continuous and intermittent machining conditions. |
| P20 |
YC201 |
11.79 |
91.8 |
1400 |
It is suitable for semi-finishing and light roughing maching of steel casting steel and stainless steel,it is a suitable grade for a wide application. |
| Y14 |
11.4 |
90.5 |
1400 |
It is suitable for semi-finishing of steel and casting steel. |
| YS25 |
13 |
90.5 |
1780 |
It is used for milling maching of steel and casting steel. |
| P30 |
YT5 |
12.8 |
89.5 |
1570 |
Suitable for the heavy duty rough turning of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions. |
| P40 |
YC45 |
12.75 |
90 |
2250 |
Suitable for the heavy duty urning of steel and cast steel with a big feed rate and also for face milling. |
| K05 |
YG3X |
15.1 |
91.5 |
1300 |
It is suitable for finishing of casting iron,nonferrous metal, heat-resistance alloy and Ti alloy. |
| YG3 |
15 |
90.5 |
1300 |
It is suitable for semi-finishing of asting iron,nonferrous metal, heat-resistance alloy and Ti alloy. |
| K10 |
YM201 |
13.9 |
93 |
1600 |
It is suitable for semi-finishing of Fe, Ni high temperature alloy, cold hard cast irons, stainless steel with good heat-resistance and nonferrous metal. It is a |
| Wide application. |
| YG6X |
14.8 |
91 |
1560 |
It is suitable for semi-finishing to light roughing of asting iron,nonferrous metal, heat-resistance alloy and Ti alloy. |
| M05 |
YS8 |
13.9 |
92.5 |
1720 |
It can be used for the finishing of based and nickel based high-temperature allous and high-strength steel and it can be also be used for the finishing of chilled cast iron, heat resistant stainless steel, high manganese steel and hardening steel. |
| M10 |
YW3 |
12.9 |
92 |
1390 |
Suitable for the finishing and semi-finishing of stainless steel and conventional alloy steel. |
| YW1 |
13 |
91.5 |
1290 |
It is suitable for semi-finishing of stainlee steel and general alloy steel machining. |
| M20 |
YM201 |
13.9 |
93 |
1600 |
It is suitable for semi-finishing of Fe, Ni high temperature alloy, cold hard cast irons, stainless steel with good heat-resistance and nonferrous metal. It is a wide application. |
| YS2T |
14.4 |
91.5 |
1960 |
It is suitable for finishing and semi-finishing of stainless steel, alloy steel, Fe alloy. |
| YW2 |
12.9 |
90.5 |
1460 |
It is suitable for semi-finishing and light roughing of stainless steel and alloy steel. |
Audited Supplier 
){kind=link}
){kind=link}