Description of product
Carbide flatted endmill, Carbide ball endmill, Carbide endmill for ball nose ,flat endmill, aluminum matching end mill, hole drilling endmill, single flute endmill
Introduction
The main cutting edge of the end milling cutter is the cylinder, and the cutting edge of the end face is the side blade. A vertical milling cutter without a central blade can not move along the axial direction of the milling cutter.
According to the national standard, the diameter of the vertical milling cutter is 2-50 mm, which can be divided into two kinds: coarse teeth and fine teeth.
Classification
There are many kinds of milling cutters, milling machine and nc milling machine groove and linear contour, milling and boring machining center, machining cavity, core, curved shape/contour.
The milling cutter is generally divided.
Flat end milling cutter, milling or rough milling, milling groove, removing large amount of blank, small area horizontal plane or contour milling;Ball head milling cutter, the surface semi - precision milling and fine milling; A knife can be used to mill the small chamfer of a steep or straight wall.Round nose milling cutter, the surface change is small, small sag area is less, relatively flat area more rough milling.Flat end milling cutter with chamfering Angle, can make rough milling to remove a large number of blank, also fine milling fine flat surface (relative to steep surface) small chamfer.Shape milling cutter, including chamfering knife, T - shaped milling cutter or drum cutter, tooth type knife, internal R knife.Chamfering knife, chamfering knife shape is the same as chamfer shape, it is divided into milling round chamfer Angle and chamfer Angle milling cutter.T type knife, milling T groove;Tooth type cutter, milling out various tooth type, such as gear.Coarse cutter, for aluminum - copper alloy cutting design rough milling cutter, can be quickly processed.
Advantage of endmill
Ingeneral, high temperature at around 800-1000 ºC can still maintain good cutting performance, cutting when can choose four to eight times higher than the high speed steel cutting speed.High hardness and good wear resistance.The bending strength is low, the impact toughness is bad, the blade is not easy to sharpen.
Application of endmill
It is used to process groove and step surface, and the cutter tooth is on the circle and end face. When the end of the milling cutter is through the center of the end teeth, the axial feed.
Audited Supplier 
){kind=link}
){kind=link}