Best quality rock drilling equipment manufacturers
General Introduction:
Our DTH hammers are all simple structure, easy to assemble and disassemble, as well as reliable quality and long service life. We have various hammer models suitable to drill holes from 64mm to 1000 mm (2-1/2" ~ 39-3/8") in diameter; and come with three kind: low pressure (5 ~ 7 bars), middle pressure (7 ~ 15 bar) and high pressure (7~ 30 bars).
Our DTH hammers mainly be produced with shank type of DHD, QL, SF, COP, Mission, SD, BR, CIR and ACD series, Diameter ranging from 2" to 8" for mining and quarrying, and 6" to 32" for water-well drilling, oil-well drilling and foundation and so on.
DTH Hammer Selection:
Choosing the right hammer is largely determined by drill machines (mainly compressor output), drilling hole size and type of rock formation. Ideally, the size of the hammer should match the required hole dimension as closely as possible, leaving just enough space for compressed air to flush cuttings and clean the hole.
The optimum range of hole size for blast-hole drilling with DTH method is 90~254 mm (3-1/2" ~ 10") with 3.5 ~ 8" hammers. Smaller blast holes are generally drilled with top-hammer tools, while larger holes typically with rotary drilling tools. In other applications, like foundation drilling, DTH hammers can be used in hole size up to 1,000 mm (39-3/8").
Usually, the smallest hole diameter a DTH hammer can drill is its nominal size, for example, a 4" hammer would drill a 4" (100/102 mm) hole. The limiting factor is the outside diameter of the hammer, because, as hole diameter reduces, airflow is restricted. Maximum hole size for production drilling is the nominal hammer size plus 1"for 5" and smaller hammers and plus 2 for 6" and bigger hammers, for example, for a 4" hammer the maximum hole size is 5" (127/130mm) while for a 8" hammer the maximum hole size is 10" (254mm).
Shape of tungsten carbide buttons:
Specificsations of our down the hole hammers:
Hammers |
Bit Shank |
Connection Thread |
Suitable bit |
Working pressure |
Air consumption |
1-3" Middle-low pressure DTH hammers |
|
RD40 box |
|
7-17.5bar |
0.7Mpa |
4.5m3/min |
BR1 |
RD50 box |
φ64-φ76mm |
7-17.5bar |
BR2 |
API 2 3/8" Reg |
φ70-φ90mm |
7-17.5bar |
1.0Mpa |
4m3/min |
BR3 |
|
φ90-φ110mm |
|
1.4Mpa |
5m3/min |
3" hammers |
DHD3.5 |
API 2 3/8"Reg |
φ90-φ110mm |
10-15bar |
1.0Mpa |
4.5m3/min |
COP32/COP34 |
M30 |
1.5Mpa |
9m3/min |
4" hammers |
DHD340 |
API 2 3/8"Reg |
φ105-φ130mm |
10-25bar |
1.0Mpa |
6m3/min |
COP44 |
QL40 |
SD4 |
1.8Mpa |
10m3/min |
M40 |
2.4Mpa |
15m3/min |
5" hammers |
DHD350 |
API 2 3/8"Reg/API 3 1/2"Reg |
φ130-φ156mm |
10-25bar |
1.0Mpa |
9m3/min |
COP54 |
QL50 |
SD5 |
1.8Mpa |
15m3/min |
M50 |
2.4Mpa |
23m3/min |
6" hammers |
DHD360 |
API 3 1/2"Reg |
φ152-φ203mm |
10-35bar |
1.0Mpa |
10m3/min |
COP64 |
QL60 |
SD6 |
1.8Mpa |
20m3/min |
M60 |
2.4Mpa |
28.5m3/min |
8" hammers |
DHD380 |
API 4 1/2"Reg |
φ200-φ279mm |
10-35bar |
1.0Mpa |
15m3/min |
COP84 |
QL80 |
1.8Mpa |
26m3/min |
SD8 |
2.4Mpa |
34m3/min |
10" hammers |
SD10 |
API 6 5/8"Reg |
φ254-φ330mm |
10-35bar |
1.0Mpa |
22m3/min |
NUMA100 |
1.8Mpa |
40m3/min |
|
2.4Mpa |
55m3/min |
12" hammers |
DHD1120 |
API 6 5/8"Reg |
φ305-φ381mm |
10-35bar |
1.0Mpa |
30m3/min |
SD12 |
NUMA120 |
1.8Mpa |
56m3/min |
NUMA125 |
2.4Mpa |
78m3/min |
Specificsations of our down the hole drill bits:
DHD shank Bits |
Bit Dia. |
No. |
Gauge |
Front |
Weight |
Part No. |
mm |
inch |
Air Holes |
Buttons |
Buttons |
(Kgs) |
DHD3.5/COP34/Cop32 |
85 |
3 11/32" |
2 |
6×φ13 |
4×φ12 |
4.2 |
DHD35-85 |
90 |
3 1/2" |
2 |
6×φ14 |
4×φ12 |
4.5 |
DHD35-90 |
95 |
3 3/4" |
2 |
6×φ14 |
4×φ13 |
4.8 |
DHD35-95 |
100 |
3 7/8" |
2 |
8×φ12 |
6×φ12 |
5 |
DHD35-100 |
105 |
4 1/8" |
2 |
8×φ13 |
6×φ12 |
5.5 |
DHD35-105 |
DHD340/COP44 |
105 |
4 1/8" |
2 |
6×φ14 |
5×φ13 |
9 |
DHD340-105 |
110 |
4 1/4" |
2 |
7×φ13 |
6×φ13 |
9.3 |
DHD340-110 |
115 |
4 1/2" |
2 |
7×φ14 |
6×φ13 |
10 |
DHD340-115 |
120 |
4 3/4" |
2 |
8×φ14 |
6×φ14 |
11 |
DHD340-120 |
127 |
5 |
2 |
8×φ14 |
7×φ14 |
12 |
DHD340-127 |
DHD350/COP54 |
133 |
5 1/4" |
2 |
7×φ16 |
6×φ14 |
15 |
DHD350-133 |
140 |
5 1/2" |
2 |
7×φ18 |
7×φ14 |
16 |
DHD350-140 |
146 |
5 3/4" |
2 |
8×φ18 |
7×φ14 |
17 |
DHD350-146 |
152 |
6" |
2 |
8×φ18 |
8×φ14 |
17.5 |
DHD350-152 |
165 |
6 1/2" |
2 |
8×φ18 |
8×φ16 |
18.5 |
DHD350-165 |
DHD360/COP64 |
152 |
6" |
2 |
8×φ16 |
8×φ16 |
26 |
DHD360-152 |
165 |
6 1/2" |
2 |
8×φ18 |
8×φ16 |
28 |
DHD360-165 |
178 |
7" |
2 |
8×φ18 |
8×φ18 |
30.5 |
DHD360-178 |
190 |
7 1/2" |
3 |
9×φ18 |
9×φ16 |
34 |
DHD360-190 |
203 |
8" |
3 |
9×φ18 |
9×φ18 |
36 |
DHD360-203 |
DHD380/COP84 |
195 |
7 11/16 |
3 |
9×φ18 |
9×φ16 |
32 |
DHD380-195 |
203 |
8" |
2 |
9×φ18 |
10×φ18 |
41 |
DHD380-203 |
216 |
8 1/2" |
2 |
10×φ18 |
12×φ16 |
49 |
DHD380-216 |
254 |
10" |
3 |
11×φ18 |
17×φ16 |
71 |
DHD380-254 |
305 |
12" |
4 |
12×φ18 |
29×φ16 |
95 |
DHD380-305 |
DHD1120 |
305 |
12" |
4 |
12×φ18 |
36×φ16 |
152 |
DHD1120-305 |
311 |
12 1/4" |
4 |
12×φ18 |
36×φ16 |
157 |
DHD1120-311 |
330 |
13" |
4 |
16×φ18 |
42×φ16 |
165 |
DHD1120-330 |
356 |
14" |
4 |
16×φ19 |
48×φ16 |
178 |
DHD1120-356 |
381 |
15" |
4 |
16×φ19 |
48×φ18 |
198 |
DHD1120-381 |
Package:
In wooden box wrapped by waterproof paper each.
The package is available based on customers' requirements.
Usage:
Suitable for cutting, drilling various hard Non-ferrous materials, such
as marble, granite, glass, ceramic, hard concrete and brick, for oil , mining , break stone.
Pictures of our carbide drill bits and dth hammer:
Shank can be available:
1), Dia. 64mm-70mm CIR70/65
2), Dia. 70mm-95mm CIR70/90
3), Dia. 90mm-102mm shank COP32, COP34, M30, DHD3.5
4), Dia. 105mm-152mm shank COP44, DHD340, SD4, M40, QL40
5), Dia. 135mm-165mm shank COP54, DHD350R, COP54, SD5, M50, QL50
6), Dia. 152mm-254mm shank COP64, DHD360, SD6, M60, QL60
7), Dia. 203mm-330mm shank COP84, DHD380, SD8, QL80
8), Dia. 254mm-380mm shank SD10, Numa100
9), Dia. 305mm-508mm shank DHD1120, SD12, N120, N125
10), Dia. 405mm-864mm shank SD15, SD18
11), CIR100, CIR110, CIR150, CIR200 and etc.
Thats all, thanks for reading!