High Quality Precision HSS Cutting Hob for Industrial Applications

Product Description

High Quality Precision HSS Cutting Hob for Industrial Applications

Gear hob is a tool that cuts gears by the development method according to the meshing principle of helical gear pairs. The gear hob is equivalent to a small gear, and the cut gear is equivalent to a large gear. The gear hob is a helical gear with a large helical angle β0 and a small number of thread heads (1 to 3 teeth), a very long tooth, and can circle the hob indexing cylinder many times, so it is like a worm with a very small helical angle γz. In order to form the cutting edge, several chip grooves are milled along the axis on the end face of the worm to form the front face and the front angle; after tooth removal and relief grinding, the back face and the back angle are formed.



It is equivalent to a helical gear with a small number of teeth and a large helical angle, and its appearance is worm-shaped. According to the processing properties, it can be divided into: precision cutting hob, rough cutting hob, shaving hob, scraping hob, squeezing hob, grinding hob, grinding hob, chamfering hob, involute hob, concave and convex arc hob, synchronous pulley hob, spline hob, cycloid hob, and double arc hob; according to the structure, it can be divided into: integral hob, welded hob, assembled hob, and end face keyway test hob, etc.
 
Advantages of dry cutting - reduce the impact on the environment and suitable for high-speed cutting.
Gear types: gear, worm gear, tooth, special tooth type.
Accuracy: A, AA (DIN 3968).
Roller cutter types: rough rolling, fine rolling, scraping, grinding, etc.
Roller cutter materials: molten high-speed steel and powder high-speed steel.
Coating: TiN, TiCN, TiAlN, Alcrona.

Specification	D mm	L mm	d mm
m1	50	40	22
m1.25
m1.5	55	45
m1.75		50
m2	65	60	27
m2.25		65
m2.5	70	70
m2.75
m3	80	80	32
m3.25
m3.5	85	85
m3.75	90	90
m4
m4.5	95	95
m5	100	100
m5.5
m6	105	105
m6.5	110	110
m7	115	115
m8	125	125
m9	140	140	40
m10	150	150

Provide various types of roller gears with module 0.5~10, single/multiple teeth, straight/spiral grooves, suitable for dry/wet cutting.
Roller gears: provide inner hole and shank types.
Outer diameter 25~160mm, length less than 220mm.
Dry and wet dual-purpose roller gears: This tool can be used in both dry and wet processing conditions.

Our package :

Our products transportation 


Our other product show 

Our factory show